Hager 159V Offset Push/Pull Set with 1″ Round Bar Stock and Standard FasteningProfessional Round Push/Pull Set for Commercial Door ApplicationsThe Hager 159V Offset Push/Pull Set features 1″ round bar stock construction with 2-1/2″ projection and 3″ offset at 90 standard configuration. This commercial-grade door hardware accommodates 10″ CTC pull and 30″ CTC push bar spacing, designed for door thickness ranging from 1-3/4″ to 2-1/2″ with D-Standard fastening. The set meets ANSI A156.6 standards for J504 bar sets and is available in multiple material options including brass, bronze, aluminum, and stainless steel.Professional Features & BenefitsDimensional Specifications: 1″ (25 mm) diameter round bar stock with 2-1/2″ (64 mm) projection for optimal grip and clearance.Offset Configuration: 3″ (76 mm) offset at 90 standard provides ergonomic access and proper door operation clearance.Center-to-Center Spacing: 10″ (254 mm) CTC pull and 30″ CTC push bar spacing accommodates standard commercial door configurations.Door Thickness Compatibility: D-Standard fastening supports door thickness from 1-3/4″ to 2-1/2″ for versatile installation options.Professional Fastening System: D-Standard fastening includes one Type 7 spanner collar connection between push bar and pull plus two Type 1 connections for secure mounting.Multi-Material Construction: Available in brass, bronze, aluminum, and stainless steel for durability and finish coordination.ANSI Compliance: Meets ANSI A156.6 for J504 bar sets ensuring professional-grade performance standards.Custom Offset Option: 45 offset pull available with prefix “X” designation for specialized applications.Technical SpecificationsANSI/BHMA: Meets ANSI A156.6 for J504 bar setsApplications: D- Standard Fastening: One Type 7 spanner collar connection between push bar and pull plus two Type 1 connections for other ends of push bar and pullBar Size: 1″Case Quantity: 1Certifications: Meets ANSI A156.6 for J504 bar setsCommercial/Residential: CommercialDiameter: 1″ (25 mm)Door Thickness: D: 1-3/4″ and 2-3/8″ to 2-1/2″Fasteners: D- Standard Fastening: One Type 7 spanner collar connection between push bar and pull plus two Type 1 connections for other ends of push bar and pullFinishes: US3, US4, US10, DBZ, US19, US28, US32, US32DMaterial: Brass, Bronze, Aluminum, Stainless SteelOffset: 3″ (76 mm), 90 standardOptions: For 45 offset pull, add prefix “X” to number (i.e., X159D)Projection: 2-1/2″ (64 mm)Pull CTC: 10″ (254 mm)Push CTC: 30″Subcategory: Door Pulls, Push and Pull PlatesInstallation & OperationReview manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.Professional ApplicationsCommercial Office BuildingsEducational FacilitiesHealthcare InstitutionsRetail EstablishmentsIndustrial and Warehouse FacilitiesMulti-Tenant Residential PropertiesGovernment and Municipal BuildingsWhy Choose Hager Quality?Hager 159V Push/Pull Sets deliver professional-grade reliability with multi-material construction options including brass, bronze, aluminum, and stainless steel. Meeting ANSI A156.6 standards for J504 bar sets, this hardware provides dependable performance with precise dimensional specifications for demanding commercial applications. Engineered for commercial door hardware applications where consistent operation and professional appearance are essential.