DynaLock 7000 Series KeyswitchesModel 7051 3101C Type, Momentary/MomentaryKeyswitches may be used to control electric locks, shunt or activate security panels, consoles or any similar requirements. The assembly is supplied with face plate, bracketry, cylinder locknut and one or two switches depending on model ordered. The user typically supplies the mortise cylinder and cam when master keying a system.Switch contacts rated 6 Amps @ 125VAC and are available momentary or maintained, SPDT or DPDT. Switch assembly requires 1-1/2 depth clearance and is shipped on single, double or narrow gang plates.Standard Finish: US32DCylinder Requirements: 1-1/8 or 1-1/4 Mortise Cylinder with bat type cam.Standard Features Compatibility: Keyswitch readily accepts any standard 1-1/8 or 1-1/4 long mortise key cylinder fitted with a specified bat type cam. Multiple Switch Functions: Switches are available in momentary or maintained functions, with single or double pole contacts and may be ordered in varying combinations. Maintained Contact: Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position. Momentary Contact: Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position. Tamper Resistant: All visible screws are spanner head. Heavy-Duty Switching: Switch capacity 6 amps at 125 volts. Factory Prewired Switches: Are shipped with 6 long factory wired color-coded 18 ga. leads. Standard Finish: US32D Brushed Stainless SteelDynaLock_Corp-2022-A-Catalog_HQ_Print_20211027.pdfhttp://www.dynalock.com/