DynaLock 5900 Power SupplyModel 5900 Power Supply/Charger, Selectable 12/24VDC Output at 6A ContinuousDynaLock 5900 and 5950 Power Supply/Chargers supply a regulated 12 VDC or 24VDC at 6 Amps nominal continuous current. Theyre housed in hinged, locking steel enclosures capable of accommodating one or two optional 12AH lead acid rechargeable standby batteries. Model 5950 includes a 8-zone power distribution controlller featuring fused Class 2 outputs individually rated a 2A each, with selectable fail-safe, fail-secure power, or isolated dry contact signal operating modes, supervised access control and fire alarm trigger inputs, and a cascade facility, allowing controllers from two or more power supplies to be tied together for simultaneous fire alarm sequencing.Models are UL Listed in the US and Canada, CE, FCC and Industry Canada compliance registered. See page 4 for a full breakdown of agency listings and registrations.Features & Specifications Input = 120-240 VAC, 50-60Hz at 1.4 Amps Maximum Overall Output = 6 Amps Continuous at 12 or 24VDC In-Rush Capacity = 20 Amps for up to 100 ms, PF 0.35 at nominal 12/24VDC (5900) 8-Zone Distribution Controller with Individual 2 Amp Rated Lock Outputs and Access Control Inputs (5950) Supervised Fire Alarm/Access Control Interface with Selectable Latching and Reset Input (5950) Built-in Temperature Compensated Battery Charger 1.5A Maximum Charging Current Auto Switchover To Battery Standby Below 72.5 VAC Automatic Battery Load Test Every 48 Hours Battery Reversal Protection Low Battery Indication at 11.4/22.8 Volts Automatic Low Battery Disconnect at 10/20.2 Volts AC, DC and Battery Status LEDs on Enclosure Door AC and Battery Failure CMOS Relay Outputs Battery Leads Included Key-Locked Enclosure Lid Enclosure Size: 13.3W x 17.6H x 4.3D (338mm x 448mm x 110mm) Operating Temperature: 32F to 120F (0C to 49C) Lifetime WarrantyDynaLock_Corp-2022-A-Catalog_HQ_Print_20211027.pdfhttp://www.dynalock.com/